Open Jobs

Superior Skilled Trades is seeking Licensed Journeyman Electricians for large-scale project in Austin, TX.

NCW is looking for welders with stainless experience for a six week project in Rocklin, CA.Job is working 60 hours per week.Required Welding SkillsWelding processes include: Stainless Steel Tubing/Structural and Carbon Tig Open Root Schedule 40 Socket Weld

TRILLIUM IS SEEKING TIG WELDERS IN SIOUX FALLS, SD ASAP!!!!!!!!!!!!!!!!4 week project working 70-78 hours weekly.Main scope of project includes working with food grade stainless steel assisting with onsite fabrication and installation.Will be structural welding for conveyor legs and brackets, welding cabinet walls, and welding structural supports for overhead conveyors and mezzanines.

We are hiring experienced Low Voltage Technicians near Manheim, PA.Key ResponsibilitiesPull, route, and terminate Cat 6 cable throughout a large commercial facilityMount and install wireless access points per project drawings and specsDress and terminate cable in telecom/IDF closets, patch panels, keystone jacks, and cable managementFollow low voltage installation standards and maintain clean, professional workmanship throughoutWork from blueprints, riser diagrams, and project documentation as directedSchedule: Mon - Sat, 60h / week.

We are looking for journeyman electricians in Tupelo for a 3-4 week job.Working 7 - 10s until complete.

Trillium needs a Welding QA/QC - CWI in Rincon, GA.ResponsibilitiesStorage tanks QA/QC - CWIMust review materials for verification of proper material being used, including Material Test Reports, weld rod, weld gasses, welding processes, and welder qualifications to determine if the welder is qualified for the welding process, as well keep a current weld map and continuity log.Inspect welders while work is in progress

Schedule & Pay50 hrs/week | 3-week project | Per diem: $500/week (note: weekly total, not per-day)Job ScopeBranch Pipe and Wire, lighting, and Trim on an industrial project

Seeking Pipefitters in Marion, IN for a 3 week project.Schedule40 hrs/week | 3-week project | Per diem: $150/day (days worked)Job ScopeWill be fitting 2" SCH 40 threaded gas lines

Per Diem$100/day OR Hotel + $40/day for all 7 days (full schedule required)ResponsibilitiesJob is primarily fitting and mechanical installation, but must be willing to help wherever needed on the jobsite.Must be willing to assist with general mechanical work, equipment installation, and other tasks as needed.Some demolition and removal work may be required.ScheduleMon–Sat (most Sundays), 70h+ / week

Compensation1st Shift: $52.30/hr | 2nd Shift: $61.19/hr | Weekly wages: $3,500–$4,600 (shift-dependent) | OT: Double time at $104.60/hrScheduleMonday - SaturdayShifts: 6:00 am - 4:00 pm (1st) ; 4:00 pm - 2:00 am (2nd)Hours: 60 total weekly hoursStart Date: ASAPDuration: 2+ yearsJourneyman Electrician Job DescriptionExperienced commercial electrician responsible for supporting the construction of a new data center facility. Primary duties include installing trapeze supports, assembling and installing prefab electrical components, and preparing infrastructure for large-scale electrical systems. Work includes both current tasks and upcoming phases, such as core & shell electrical installation, underground systems, and temporary power distribution.Responsibilities for Journeyman ElectricianInstall trapeze hangers, cable tray supports, and seismic-rated support systems for large electrical and low-voltage pathways.New system install, bending pipe, pulling wire, hookups, terminating, etc.Assemble, modify, and install prefab electrical components, racks, and assemblies according to engineered drawings and project specifications.Assist with core & shell electrical rough-in, including conduit routing, feeders, branch circuits, and equipment layout.Support upcoming underground electrical work, including conduit routing, duct banks, vaults, grounding grids, and site electrical infrastructure.Help establish and maintain temporary power systems for construction operations, including panels, transformers, cables, and distribution equipment.Interpret blueprints, one-lines, and installation details to execute work accurately and efficiently.Install and secure cable trays, raceways, and conduit systems (EMT, RMC, PVC, and underground-rated materials).

ScheduleNight Shift | 50 hrs/week | 5-month project | Start: ASAPPosition SummaryPlan, lay-out, install, test and perform all process requirements for installation of instrumentation in accordance with all applicable plans, specifications, codes and industry standards. Fabricate and install conduit, tubing, and piping including the installation of instruments and supports.Experience LevelSkilledPrimary Responsibilities and DutiesSelect type and size of pipe, tube and related material according to job specificationInstall, repair, maintain, and adjust indicating, recording, tele-metering, and controlling instruments and test equipment used to control and measure variables such as pressure, flow, temperature, motion, force, and chemical compositionMeasure, cut, bend, thread, assemble and install primary piping and tubingMove materials and equipment to work locations and set up work sitesDisassemble malfunctioning instruments or test equipment and examine and test mechanisms and circuitry for defectsReplace or repair defective parts using hand toolsReassemble instrument or test equipment and test assembly for conformance to specifications using instrumentsInspect instruments and test equipment periodically and adjust calibration to ensure functioning within specified standardsCalibrate instruments or test equipment according to established standardsInstall associated support structures, components and tubingEstimate sizes, distances, and quantities and determine time, costs, resources, or materials needed to perform a work activityInspect subordinate work for compliance and deficiencies

Schedule50 hrs/week | 6-month project | Start: ASAPPosition SummaryThe Driver will load and unload materials and deliver to, from and within work sites as required. This position requires a commercial driver's license (CDL).Experience LevelIntermediatePrimary Responsibilities and DutiesOperate medium to large sized trucks, transporting materials between company work sites using private roads and driving on public highwaysLoad and unload trucks, using other equipment as necessary, such as forkliftsSecure cargo for transport, using rope, blocks, or coversObtain proper and complete documentation prior to moving materialsCollect delivery instructions from appropriate sources, verifying instructions and routesPerform pre-trip and post-trip vehicle safety inspections and report any defects, damage, or repairs neededPerform basic vehicle maintenance tasks, such as adding oil, fuel, or fluidsMaintain logs of working hours, or of vehicle maintenance, following applicable state and federal regulations

Pay & Schedule$36–$38/hr DOE | Mon–Sun 70h+ / week | Per diem: $100/day OR Hotel + $40/day for all 7 days (full schedule required)Key Responsibilities1–4 inch stainless pipe, Schedule 10/20/40TIG welding (~80% of duties)Possibly demo workMust be willing to help with other tasks as needed

About YouAre you knowledgeable about quality and safety regulations in construction environments? Do you engage and advise job site leadership regarding quality programs and best practices? If this sounds like you, then you should mull over a career with Mullins Mechanical.We are looking for an experienced, self-motivated Quality Inspector to join our team in Canton, MS.ResponsibilitiesCreate, interpret, and understand Weld Map Isometric drawings using computer software programsEnter welding and inspection information into the tracking toolAssist with pressure testing plans and functionsAssemble project documentation packagesPerform and document inspections based on drawings, specifications, and procedures to determine complianceTest welders and perform weld inspections under various codesFollow Project Quality Assurance PlansFollow Inspection and Test Plans (I&TPs)Assist Site Quality Manager with various daily activities as assignedMaintain commitment to Mullins core values and safety policies

360X Staffing is hiring for Installation Technicians in Rockville, VA.Position SummaryWe are seeking a detail-oriented Technicians with strong mechanical and technical skills to lead the assembly, installation, and validation of manual and automated workstations. This role is critical for ensuring that complex equipment and fixtures are installed to exact project specifications in high-volume distribution environments.Key ResponsibilitiesPrecision Assembly: Perform high-volume installation and assembly of workstations and components, ensuring all work meets specific technical drawings and blueprints.Technical Installation: Securely anchor and fasten equipment to various surfaces and substrates per project requirements.System Validation: Use hardware and software tools to perform quality control measures, validate installations, and report progress.System Maintenance: Troubleshoot workstation issues during the install phase and apply 5S standards (labels, stickers, and tape) to maintain organization and safety.Compliance: Ensure all workmanship meets high-quality standards and specific project safety requirements.Working Days: Monday, Tuesday, Wednesday, Thursday, FridayWorking Hours: 50+ hours per week

Instrumentation & Controls (I&C) Journeyman ElectricianLocation: Austin, TXPer Diem: $90/day (for qualified travelers)Schedule: Monday - SaturdayHours: 40-50 Hours Per WeekDuration: Long-Term Commercial/Industrial ProjectPosition OverviewWe are currently hiring experienced Instrumentation & Controls (I&C) Journeyman Electricians for a long-term commercial and industrial construction project in Austin, Texas. This position is strictly for Journeyman-level electricians and requires advanced knowledge of electrical systems, instrumentation, controls, troubleshooting, and industrial installations.Candidates must possess a Journeyman Electrician License or be able to demonstrate Journeyman-level experience performing electrical and controls work independently. This role requires strong leadership skills, the ability to oversee apprentices, and extensive experience interpreting electrical specifications, drawings, and code requirements.ResponsibilitiesInstall, troubleshoot, and maintain instrumentation and control systems in commercial and industrial environments.Read and interpret electrical blueprints, schematics, P&IDs, one-line diagrams, and project specifications.Install and terminate power, control, and instrumentation wiring.Perform conduit installation and wire pulling in accordance with project requirements.Install, troubleshoot, and commission electrical and control equipment.Assist with project planning, material take-offs, and coordination of electrical installations.Ensure all work complies with NEC, local codes, and project specifications.Guide and oversee apprentice electricians while maintaining productivity and quality standards.Coordinate with project management, engineers, and other trades to ensure project success.Maintain a safe and organized work environment while adhering to OSHA standards.

We are seeking experienced Construction Safety Professionals that will play a crucial role in implementing and maintaining our safety programs, ensuring compliance with all applicable regulations, and promoting a strong safety culture. The ideal candidate will possess a thorough understanding of safety principles, excellent communication skills, and a proactive approach to identifying and mitigating hazards.Daily per diem is being offered for this position, 100.00 per day.Multiple projects located nationwide, starting in KSResponsibilities will include:Responsible for the overall safety of the project, including administration and enforcement of the Site Safety Plan. Works with site team to ensure compliance with safety, environmental and health standards. Investigates all safety and property damage incidents. Submits all incident reports to Sr. EHS leadership team. Leads weekly all hands Safety meetings. Leads by example on appropriate safe work practices and PPE. Leads Safety Observation Reporting (SOR) program.DailyDaily observations and site walks.Present daily safety topics, weather, for Daily meetings and client POD's.Participate in daily stretch and flex.WeeklySite orientations (or as needed).Lead all hands safety meeting.Attend weekly internal project meetings.MonthlyConduct monthly site audit.Review velocity reports for leading and lagging indicators.Assist craft superintendents with updating JHA.Cross train with environmental coordinator.

Position SummaryPlan, lay-out, install, test and repair wiring, electrical fixtures, apparatus, motors, equipment and control systems in accordance with all applicable plans, specifications, codes and industry standards.Location: Near Abilene, TXShift: DaysDuration: 2 yearsHours: Scheduled for 5 x 10 with ability to work up to 13/1.Per Diem: $150/ Days WorkedExperience LevelSkilledPrimary Responsibilities and DutiesInterprets drawings, sketches, software, plans and determines best work procedures, tools, equipment needed to troubleshoot and repair problemsMeasures, cuts, bends, threads, assembles and installs electrical conduit; weld supports; install cable and duct banks; make terminationsInstalls control and distribution apparatus' and fastens in placeTest and start up systems and continuity of circuit to insure electrical compatibility and safety of componentsObserves functioning of installed equipment or system to determine hazards and need for adjustments, relocation, or replacementMay be required to pull wire through conduit; connect wiring to lighting fixtures and power equipmentWork with high and low voltage systemsDisassembles and repairs defective electrical equipment or systemsOperate electrical and mechanical hand tools, power, hydraulic, pneumatic and electrical toolsEstimating sizes, distances, and quantities; or determining time, costs, resources, or materials needed to perform a work activity.Inspect subordinate's work for compliance with the contract plans and specifications, point out deficiencies and explain and take any corrective action needed.

Structural Welders Needed – Dalton, GA.Schedule:72 hours per week availableDay Shift: 7:00 AM – 7:00 PMPer diem paid 7 days/weekStart Date: 06/22/2026Job Duties:Structural steel weldingPipe welding and fabricationIndustrial maintenance and repairsEquipment installationMIG, TIG, and Stick weldingFabrication of metal components and assembliesReading blueprints and layout measurements

$750.00 Hiring Bonus for Qualified CandidatesExperienced Journeyman Electricians are needed for projects located in and around Minden, LA. This is a first-shift opportunity. Pay rate: $35/hour plus $110/day per diem for travelers 60+ miles from the job site.Job Scope:Installing complex conduit configurationsPulling wireTerminationsHand bending conduitMake correct complex EMT piping bends with minimal waste or jointsInstalling conduit stub upsInstalling standard and more complex conduit and electrical componentsInstalling conduit UPS systems, DLO cables, fire alarms, panels and switching gearsBenefits:Tradesmen+ Rewards Program – earn points for hours workedVacation PayHealth insurance401(k) retirement savings plan

Welder Helpers needed in Glidden, IA ASAP.Schedule: 40–48 hours per week. Per Diem: $100/day all 7 days.Project Details:2 week shutdown in Iowa, then a longer project in Minnesota to followAssisting with fit up, material handling, and jobsite clean up

North Dakota Licensed Journeyman Electricians needed for long-term projects in Underwood, ND.Pay: $55/hour plus incentives (discussed during interview).Per Diem: $140/day (days worked).Schedule: Current schedule is 5 days. Duration: Ongoing.License: Active ND Journeyman license required, or reciprocal from: Alaska, Arkansas, Colorado, Idaho, Iowa, Maine, Minnesota, Montana, Nebraska, New Hampshire, South Dakota, Utah, or Wyoming.Experience Requested:Install, bend, and run EMT and rigid conduitPerform wire pulls, terminations, and panel installsExperience setting electrical gearRead and execute from prints and schematics

We are looking for a Traveling CCTV/Fire Alarm Tech in Minnesota to work 40–50 hours a week. Per diem: $45.00/day. Pay: $25.00–$35.00/hour.

Commercial sheet metal work in Columbus, OH.Job Responsibilities:installing rectangular and spiral ductworkVAV boxesDampersDiffusersAir devicessetting rooftop unitsthe ability to read blueprints and handle layout and installation independentlySchedule: Monday-Saturday 50 hours a week.Project Duration: Work to go through April 2027.

Long-term industrial project in Santa Teresa, NM.Per Diem: $185/day all 7 days ($1,295/week).Project Note: Candidates must currently hold an active New Mexico Journeyman Pipefitter Card (JPF).Job Details:Working with 8", 18", and 24" carbon steel pipeSchedule: Monday-Saturday, 7:00 AM - 7:30 PM (60 hours per week)