Open Jobs

Full-time structural welding projects located in and around Paducah, KY. Per diem ($100/day) for travelers 60+ miles from job site. Job Scope: Perform structural welding on carbon steel and occasional stainless Repair cracked welds, damaged framing, deck plating and structural members Install and replace bulkheads, stiffeners, brackets, frames and decking SMAW & Stick welding Hardwire flux core welding as required Interpret blueprints, shipyard drawings and work orders Perform horizontal, vertical and overhead welding positions Cut and fit material using torch and grinders Gouging and back-gouging as needed Work in confined spaces, inside hulls, tanks and tight compartments Maintain weld quality to meet shipyard and Coast Guard inspection standards Benefits: Tradesmen+ Rewards Program (points earned for hours worked) Vacation pay Health insurance 401(k) retirement savings plan

Shop Welder Shop welders needed for a 2-month job in Reading, PA. Shifts start at 5:00 AM, 10 hours/day, 50 hours/week. Per diem paid for 7 days if Saturday is worked (Saturday not required). Key Responsibilities Weld bridge components using FCAW, GMAW/MIG, SAW, and SMAW in accordance with AWS D1.1 Interpret weld symbols, WPSs, and shop drawings Perform weld prep, grinding, gouging, and cleanup as required Work safely with overhead cranes, fixtures, and heavy plate assemblies Maintain compliance with AISC, AWS, and OSHA safety standards

Travel Pipefitters/Welders — North Carolina & South Carolina Projects Experienced Pipefitters and Welders needed for commercial construction and data center projects across North Carolina and South Carolina. 50 hours/week with consistent overtime opportunities and long-term project work on carbon and stainless pipe systems. What You'll Be Doing Install and weld carbon and stainless pipe systems Support commercial and data center construction projects Read blueprints and piping layouts Work with mechanical and MEP teams onsite Travel to regional project sites

Certified Riggers needed for a project in Mesquite, TX. Monday–Friday, 50+ hours/week. Per diem paid 7 days/week. Primary Responsibilities Working under RT's or crawlers, rigging up modules that weigh between 80k–110k lbs Staging the laydown area for storage Operating gantry cranes, versa lifts, forklifts, telehandlers, and scissor lifts Pulling material off of lowboy flatbed trucks and loading trucks for last mile hauling

Pipefitters needed in Apple Grove, WV. 3–4 month project, 60 hours/week. Pipefitter Job Responsibilities Select the type and size of pipe and related materials and equipment, such as supports, hangers, and hydraulic cylinders, according to job specifications Inspect the worksite to determine the presence of obstructions Plan sequence of installation to avoid obstructions and activities of other workers Cut pipe using a reciprocating saw, pipe cutter, cutting torch and pipe cutting machine, and/or other small hand tools Thread pipe using a threading machine Bend pipe by hand or with pipe-bending tools and machines Mount pipe hangers and brackets on walls and ceiling to hold the pipe Assemble and install a variety of metal or nonmetal pipes and pipe fittings Secure pipes to structure with brackets, clamps, and hangers, using hand and power tools Perform minor maintenance and cleaning of tools and equipment Observe and comply with all safety and project rules and all company policies and procedures Perform other duties as required Benefits Company-subsidized health insurance 401(k) plan with employer match Paid vacation and paid holidays Continuing education opportunities

Job Description:We are seeking experienced Structural Welders to join our shipyard team in Houston, TX. This role involves welding structural components using .045 fluxcore with 100% CO2 gas in vertical up and overhead positions.Responsibilities:Weld structural components using .045 fluxcore with 100% CO2 gas.Perform welding in vertical up and overhead positions to meet shipyard requirements.Adhere to shipyard welding standards and safety protocols.Collaborate with team members and supervisors to ensure welding tasks are completed as per specifications.

This is a high-skill welding role requiring confidence and proven ability with 5/32" 6011 and 1/8" 7018 electrodes. Candidates must be able to pass a practical weld test and be ready to work in a demanding marine repair environment.Job Description:As a Stick Welder specializing in barge repair on the Mississippi River waterfront in Hartford, IL, you will be responsible for performing welding operations using 5/32" 6011 rod and 5/32" 7018 rod to pass vertical up and overhead lap welds on 3/8" plate.Your primary tasks will include executing precise and consistent welds, adhering to quality standards, and ensuring weld continuity and consistency on barge repair projects.Successful candidates must demonstrate proficiency in welding techniques, including vertical up and overhead lap welds, while meeting visual inspection criteria for weld quality, continuity, and consistency.Working collaboratively with a team of welders, fabricators, and repair specialists, you will contribute to the structural integrity and functionality of barges on the Mississippi River waterfront.This role demands attention to detail, adherence to welding standards, and the ability to produce high-quality welds with no undercut to ensure the durability and safety of repaired barges.

Electrician Job Description:We are looking for an electrician capable of bending and running conduits, pulling wires, and installing light fixtures. Must be able to wire panels, terminate, and troubleshoot.HOURS: 48+ HR/Week, Monday - Friday (2 Saturdays on, 1 off)SCHEDULE: Workdays will be Monday-Thursday 5:00 am-3:30 pm, Friday 5am-1:30 pm (some Saturdays)START DATE: ASAPDuration: 12+ months

Job Description:As a Stick Welder at a barge repair facility in Channelview, TX, your primary role will involve proficiently using 5/32 6011 SMAW and 1/8" 7018 SMAW electrodes. You will be required to perform vertical up and overhead welding tasks to repair and maintain barges in the facility.Responsibilities:Weld using 5/32 6011 SMAW and 1/8" 7018 SMAW electrodes on barge repair projects.Perform vertical up and overhead welding techniques as necessary.Repair and maintain barge structures to meet operational requirements.Ensure the integrity and quality of welds are in accordance with safety and industry standards.

Job Summary:The Safety Training Specialist at Mullins Mechanical is responsible for administering Safety Training at the jobsite level. They ensure all employees are onboarded per the standard operating process and facilitate the expectations of the required Safety Programs and required Annual Safety Trainings. The overall goal of the safety training specialist is to protect Mullins’ interests, support employees and on-site supervision helping them successfully complete a quality project safely with zero incidents, while promoting and enhancing client relationships and the company core values.Reporting Structure:Reports to the Corporate Safety Trainer.Essential Duties & Responsibilities:Support and promote Mullins’ safety culture at the job-site levelUse discretion, independent judgement, and professional skills to plan and implement safety training from the corporate training program that applies to each jobsites scope and needsCoordinate onboarding efforts with Human Resources and the Recruiting DepartmentCollaborate with the Project Management team to schedule and conduct safety training as needed, the use of on-site safety coordinators may be needed or required at times and should be coordinated with the Project Managers and Corporate Safety TrainerSubmit Monthly & Quarterly Reports to the Corporate Safety TrainerHave full capabilities to train on higher level training courses:Mobile Elevated Working Platform (MEWP)Telehandler/Forklift (TELE)First-Aid/CPR/AEDConfined SpaceLockout/Tagout (LOTO)Heavy EquipmentScaffold CompetencyFall ProtectionLadder SafetyMake recommendations to improve processes and procedures and look for ways to continuously improve Mullins’ Safety Training Program and related policies and proceduresMaintain a culture and working environment where safety and its required training is planned in every taskMaintain detailed training files and recordsEnsure PPE requirements are met by all employees on-site through proper training and culture building strategies.Build proficiency within Procore, Schoox, Excel, Word, Outlook, PowerPoint, etc.Duties outside of what is listed here may be required. This position will require travel to site and extended periods of travel based off training needs for each project.

This role involves working on the final phase of a commercial access control installation, focusing on door hardware finishing, adjustments, and system completion in an active construction environment.Job Duties:Cut strikes on commercial door frames (including filled frames)Install and adjust magnetic locks and related hardwareComplete final device connections to bring systems onlineAdditional Opportunity:Technicians willing to travel may be considered for an upcoming longer-term project in Minnesota following completion of the Houston assignment.

Experienced Boilermaker needed for a project in Columbus, GA with a strong background in fabrication, assembly, maintenance, and repair of steam-generating boilers and associated boiler tube systems. The ideal candidate will have hands-on expertise working with high-pressure boilers, tube rolling, welding, and boiler inspections, ensuring safe and efficient plant operations.Job Responsibilities:Assemble, install, maintain, and repair steam-generating boilers, pressure vessels, tanks, and related equipmentRead and interpret blueprints, engineering drawings, and technical manualsLay out, position, align, and secure components prior to assemblyCut, shape, and fit metal components to construct and repair boiler tubes, drums, and headersPerform tube removal and tube replacement in boilersUse torches, welding equipment, and cutting tools for fabrication and repairMaintain accurate records of inspections, repairs, and work performedInspect boiler systems for cracks, leaks, corrosion, and other defectsConduct hydrostatic and pressure testing on repaired and newly installed systemsPreheat if necessary using hand torch or heating furnaceWork in flat, horizontal, vertical, or overhead positionsWork in confined spaces and at heights using a sky climberAdhere to OSHA, ASME, and company safety standardsCollaborate with engineers, supervisors, and other skilled trades to complete projects efficientlyRespiratory protection is common and may be requiredOther duties as assigned

Industrial safety technician assignment in De Soto supporting inspections, audits, accident investigations, training, risk mitigation, and regulatory compliance.

Industrial electrical project in Perry with rigid conduit installation, crew support, conduit mounting and securing, wire pulls, equipment installation help, and safe work in a long-term industrial environment.